Clavia Nord Modular V3 User Manual download pdf (Page 15)

NORD MODULAR V3.0 3. Getting started

Page 7

4. When the installation of the synthesizer Update is complete, you are set to start the Modular Editor

3.0 program.

Make all the audio connections before turning on any of the devices. The computer that runs the Editor

must be connected to both

PC I

and

PC O

of Nord Modular.

Note! You cannot use the Editor software and the Nord Modular PC ports in a traditional MIDI set-

up, using MIDI THRU-boxes or MIDI THRU connections on other instruments. The Nord Modular

PC ports have to be used exclusively for the Editor software on the computer.

USB MIDI

USB MIDI USB MIDI

USB MIDI

USB MIDI interfaces sometimes have problems handling MIDI data when AppleTalk is activated.

Therefore, if you are experiencing communication problems when using a USB MIDI interface, disable

AppleTalk.

MIDI

MIDI MIDI

MIDI

The Editor needs a separate MIDI port (1 MIDI In and MIDI Out pair) for each connected Nord Mod-

ular/Micro Modular to run properly. If you are using several Modulars and/or a sequencer software on

the same computer as the Editor, you will need a multiport MIDI interface. You must configure the Ed-

itor and the sequencer to use separate ports of the multiport MIDI interface.

Most of the sequencer software automatically opens every port of a multiport interface. In this case

you have to deassign one or more of the ports in the sequencer software and dedicate them exclusively

to the Editor. See the MIDI setup/configuration/devices part in the sequencer program manual.

OMS

OMS OMS

OMS

If you want to run one or several MIDI applications at the same time with the Editor, make sure you have

selected ‘MIDI in background’ in the OMS setup.

Nord Modular Micro Modular

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 231 232

No comments

Clavia Nord Modular V3 User Manual Page 15