Clavia Nord Lead 3 User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 114
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
Basic Operations Page 17
2. Press the System button repeatedly until the character to the left in the display says “br” (for Bend Range).
3. Use the Program Up/Down buttons to the left of the display, to change the value.
The table on page 68 shows you how many semi-tones each value in the display represents.
If the Pitch Stick should be malfunctioning on startup, the display will scroll the message “PITCH BEND
ERROR.”. The Nord Lead 2 will then work as usual, but the Pitch Stick will be disabled.
Modulation Wheel
The effect of moving the Modulation wheel can be different for each Program. You can change the func-
tion by pressing the button just above the Modulation wheel. It steps between five possibilities. A de-
scription of each can be found on page 53.
Master Tune
To tune the Nord Lead 2 to other instruments, proceed as follows:
1. Hold down the Shift button and press the button labelled Tune.
2. Use the Program Up/Down buttons to the left of the display, to change the value.
00 is normal 440Hz tuning. Lower pitches are indicated by a dot to the right of the number and values
higher than normal pitch are indicated without a dot. The values are in cents (hundreds of a semitone).
3. Press the Shift button again.
Using a Sustain Pedal
A foot switch connected to the Sustain Pedal input works as a sustain pedal on a piano. Set it up as fol-
lows:
1. Hold down the Shift button, and press the “System” button.
2. Press the System button until the two first digits in the display are “SP”.
3. Use the Program Up/Down buttons to switch the right digit between “0” (Sustain Pedal – open when pressed)
and “1” (Sustain pedal – closed when pressed).
4. Press the Shift button again.
Nord Lead 2 will also recognize Sustain Pedal messages via MIDI (Controller message 64).
TUNE OUT MODE LOCAL PROG. CTRL
...and press the button labelled Tune (the LED above the button lights up).
Hold down the Shift button...
SHIFT
FILTER
OSC 2
MORPH
LFO 1
FM
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 113 114

Comments to this Manuals

No comments