Clavia Nord Lead 2X User Manual download pdf (Page 108)

13. MIDI implementation: System Exclusive implementation NORD LEAD 2X V1.0x

Page 106

• If the Sys Ex data for a single Patch is sent upon receiving a Patch Dump Request message, either the Pro-

gram Location or the Edit Buffer will be stored, depending on the Message Type byte in the Request

message. This will also determine where the Patch will be placed when it is sent back to a Nord Lead

2X.

• If Message Type = 0 (Edit Buffer), the Message Specification can be 0 to 3, corresponding to Patch

Slot buttons A to D.

• If Message Type = 1 to 10, then the Message Specification (00 to 98) corresponds to the Program

Number within the Bank (01 to 99).

K K

P P

D D

This message contains all settings in a Percussion Kit. It is transmitted from the Nord Lead 2X in one of

two cases:

• When a Patch Dump is initiated from the front panel and a Percussion Kit is selected.

• When a valid Patch Dump Request message has been received, specifying a Percussion Kit location or

an Edit Buffer containing a Percussion Kit.

Percussion Kit Patch Dump messages will also be sent if the “Dump All” command is used.

Byte (Hex) Byte (Decimal) Description

$F0 240 System Exclusive

$33 51 Manufacturer ID (clavia)

<Device ID> = Global MIDI Channel. 0 to 15 ($0-$F).

$04 4 Model ID for Nord Lead 2X

$00 to $0A 0 to 10 Message Type specifies the Bank. 0=Edit Buffer, 1 to 10

=Bank 1 to 10

$00 to $03 or $00-$62 0 to 3 or 0 to 98 Message Specification specifies the exact memory location,

see below.

<Patch Data 1> See page 111.

$F7 247 End Of Exclusive

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 118 119

No comments

Clavia Nord Lead 2X User Manual Page 108