Clavia Nord Stage User Manual download pdf (Page 45)

Extern Menu

Hold Shift and press Program 4/Extern to access the Extern menu,

where you can ﬁnd settings and functions relating to the Extern section.

Use the Page 3 and 4buttons to navigate between the various menu

items on the menu and use the Value Dial to change settings. When

you are done, press Exit (Shift) to exit the menu.

M Most items on the Extern menu have separate entries for Slot A

and B.

M Most settings from the Extern menu are saved with a Program.

The only exceptions are the “Extern MIDI A/B Channel” if Extern

MIDI Mode is set to Global, and the “Send on Load” function

which always is global.

Extern MIDI Mode

The Extern MIDI Channel can be set in two different manners, either

globally, or independently for each program. When “Global” is selected,

the Extern MIDI A & B channels will be the same for all programs. If

program is selected, the Extern MIDI A & B channel setting will be

saved with each Stage 2 program.

Range: Global, Program (default)

Extern MIDI A/B Channel

This sets the Extern section’s transmitting MIDI channels.

Range: MIDI 1-16 (MIDI 14 default for Slot A, MIDI 15 is default for

Slot B), USB1 - USB16,

Extern MIDI A/B Volume

The Extern section can send MIDI Volume messages (0-127), allowing

you to control the level of an external device.

Range: Off (Default), 0-127

Extern MIDI A/B Prog Change

The Extern section can transmit MIDI program Change messages (0-

127), allowing you to change programs on external devices.

Range: Off (Default), 1-128

Extern MIDI A/B Bank Sel cc 00

This allows you to set a value for a MIDI Bank Select message on

Control Change address 00 (cc 00).

Range: Off, 0-127

Extern MIDI A/B Bank Sel cc 32

This allows you to set a value for a MIDI Bank Select message on

Control Change address 32 (cc 32).

M There are many different variations between instruments in how

Banks are numbered and accessed via MIDI. Please consult your

other unit’s manual.

Range: Off (Default), 0-127

Extern MIDI A/B CC Number

This decides which MIDI Controller number the Extern section should

be transmitted when MIDI CC is activated.

Range: MIDI CC 0-119 (Default is 2)

Extern MIDI A/B CC Value

This will transmit values for the selected MIDI CC number.

Range: Off (Default), 1-127

Extern MIDI A/B Send Wheel

This setting toggles if the Stage 2’s Modulation Wheel should transmit

Mod Wheel MIDI data (CC 1) or not.

Range: Yes (Default), No

Extern MIDI A/B Send A.Touch

This setting toggles if the Stage 2’s After Touch should transmit Chan-

nel Touch MIDI data or not.

Range: Yes (Default), No

Extern MIDI A/B Send CtrlPed

This setting toggles if a control pedal connected to the Stage 2’s CTRL

Pedal input should transmit Expression MIDI data (CC 11) or not.

Range: Yes (Default), No

Extern MIDI A/B Send Swell

This setting toggles if a control pedal connected to the Stage 2’s Swell

Pedal input should transmit Foot Controller MIDI data (CC 4) or not.

Range: Yes (Default), No

Extern MIDI A/B Vel Curve

Use this setting to adjust the velocity response curves that applies to

the Extern section.

Range: Soft , Norm, Hard

Extern MIDI Send on Load

This setting toggles if any settings for the Program Change, Volume

or MIDI CC messages in the Extern section should be automatically

transmitted from the Stage 2 when a Program is selected, or not.

Range: Off (Default), On

Extern MIDI Soft Thru

Incoming MIDI that matches the Global or Slot A/B channels can be

re-routed on the Extern channel to the Stage 2’s MIDI OUT jack or the

USB interface, if the Extern section is active on the current Program.

This setting determines if this re-routing should apply or not.

Range: Off (Default), On

Chapter 11 MeNUS | 45

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

Comments to this Manuals

No comments

Clavia Nord Stage User Manual Page 45

Comments to this Manuals

Related products and manuals for Digital pianos Clavia Nord Stage